Machine Screw Mounting Holes
The majority of our customers use the industrial two sided tape on the back side of the lock along with the cylinder mounting nut to secure the 7432 four dial Combi-Cam Ultra.
The 7432 also has a third way to secure the lock. On each side of the body, there is a machine screw hole (Machine screws are not supplied with product). The machine screws needed are #8 and the length would depend on the thickness of the material the lock is installed into. Add 1/8" to the material thickness to get the machine screw length.
Example: If the material thickness is 7/8", 1" long #8 metal screws would be required.
Measurements-
Division of FJM Security Products
